Planetary gearbox standard version PL2 FS
TANDLER description: ServoFoxx® planetary gearbox series PL2 FS
This extremely low-backlash planetary gearbox has been developed specifically for use with highly dynamic servo motors. With two, three or even four gear stages, ratios up to 10,000:1 can be achieved.
Technical data
| PLANETARY GEARBOX PL2 FS | |
|---|---|
| Gearbox size | 7 gearbox sizes available |
| Ratios | One gear stage: 3:1 - 4:1 - 5:1 - 6:1 - 7:1 - 8:1 - 9:1 - 10: 1 Two gear stages: almost every ratio up to 100:1 is possible Three gear stages: almost every ratio up to 1.000:1 is possible Four gear stages: almost every ratio up to 10.000:1 is possible |
| Max. torque | Up to 1.750 Nm |
| Max. speed | Up to 3.000 min-1 Higher speeds on request |
| Backlash | One stage 6' - Two stages 8' |
| Reduced backlash | One stage 3' - Two stages 4' |
| Output shaft diameter | From 19 to 55mm depending on the gearbox size |
| Motor shaft diameter | From 8 to 42mm depending on the gearbox size |
Also available with input shafts, see ServoFoxx® planetary gearbox PL2.
